Welcome Drillers and Homeowners!

We present to you the:

PVC Perforator

Designed by: William Spencer

The pvc perforator is designed for easy use on PVC well casing for well casing. It is simple to use and designed for use on 4", 4 1/2", 5", and 6" casings by making a simple adjustments.

Easy as 1, 2, 3!

Using the PVC Perforator is as easy as (1)dropping it to the desired location in the well to be perforated and then (2) returning it to the surface for (3) reinsertion. A cable winch or other suitable device capable of pulling approximately 500 lbs. is required. This procedure is to be repeated for obtaining the desired number of perforations. Hole sizes can be adjustable from 1/8" to 3/8". The perforator can also clear a Pitless Adaptor.

Reasons to Perforate

Perforating a marginal well can increase the linear footage of open area and expand the production zone of the well.

Some reasons are as follows:

  1. Original perorations have become plugged over the years.
  2. The water level at the original location has changed.
  3. The driller put the perforations at the wrong location.

Cased wells can be from 50 feet (or less) to 600 feet (or more) in depth. The removal of the casing to perforate can be expensive and impractical. It may also be impossible to do without destroying the bore hole.

Low cost and Low Maintenance

The PVC Perforator has minimal moving parts and does not require a lot of maintence so your opperating costs stay affordable.

A DVD is available, upon request, showing the function of the Perforator.

Call: 505.771.9153